The 46th
General Meeting of the International Intercable
Association
The 46th General Meeting of
the International Intercable Association took place
on November 25-28,
A scientific and technical
symposium “Specialty cables (underwater cables,
submersible pump cables for oil extraction, wires and cables for solar power
sources): designs, technology, manufacturing equipment, materials and test
equipment” was held within the framework of the General Meeting.
22
presentations of the leading world companies were made during the work of the
symposium. The symposium was held in the form of 3 sessions.
Session I covered general issues of specialty cables and their use. The
following 5 reports were made during this session.
1) “Underwater
cables. Actual State and Development Prospects” (JSC VNIIKP,
2) “Modern Designs
of Submersible
Pump Cables for Oil Extraction and Problems
Occurring in their Manufacture and Operation” (JSC VNIIKP,
3) “Experience
of Transportation and Installation of Underwater Cable Lines through the
Example of the Cable Line for Power Supply to the
4) “Technical
and Economic Aspects of the Use of Solar Panels. Experience
of the Maccaferri Group (ENERRAY S.p.À., SAMP S.p.A.
Sampsistemi Division)” (SAMP S.p.A.
Sampsistemi Division,
5) “Experience
in the Construction of Solar Power Plants in the
Session II covered issues related to the specialty cable manufacturing equipment
and particularities of the manufacturing technology (13 presentations).
1) “Stranding and Armouring of Submarine Cable” (SKET
Verseilmaschinenbau GmbH, Ãåðìàíèÿ).
2) “Troester
Extrusion Technology for the Production of HV Submarine Cables” (TROESTER GmbH
& Co. KG,
3) “State of the Art and New
Approaches to the Production of Submersible Pump Cables” (SAMP S.p.A. Sampsistemi Division,
4) “Modern Lead Extrusion
Equipment for Submersible Oil Pump Cables” (H. Folke Sandelin AB (HFSAB),
5) “Rosendahl
Solutions for Special Cables” (Rosendahl Maschinen
6) “Insulation Extrusion for
Submersible Oil Pump Cables” (Maillefer
7) “Maillefer
and Sub-sea Cable Production” (Maillefer
8) “Innovative LASER Welding
Production Line for Submarine and Pump Cables” (
9) “High Performance Armouring of Submersible Pump Cables for Oil Extraction”
(Bartell Machinery Systems
10) “Advanced Design and
Manufacturing Technology of Conductor Cable for Solar Panels” (Bühler Würz Kaltwalztechnik GmbH,
11) “Modern Manufacturing
Techniques for the Continuous Production of Submersible Pump Cables”
(Davis-Standard
12) “Taping and Sintering
Technology for the Production of Oil Pump Motors Wire” (W.T.M. srl,
13) “Marking of
Specialty Cables” (Medek & Schoerner
Session III was devoted to the materials applied in the production of
specialty cables (4 presentations).
1) “High Quality Materials for Submarine Cables” (Dow Europe GmbH,
2)
“Polymer HVDC Submarine Cables” (Borealis AG,
3)
“Special Cables for Photovoltaic Applications (Solar Cells) with Halogen-Free
Materials of Condor Compounds” (Condor Compounds
4) “The Quality of a Cable
Starts with the Compound” (SIKORA AG,
Russian companies “NP Spetskabel”
Ltd., OJSC “Expokabel” and “ELINAR Holding” Ltd. joined the International
Intercable Association.
Uzbek companies “UZKABEL” JV OJSC and “PachtaKabel” IP Ltd. were expelled from the International Intercable
Association for
their failure to pay the membership fees.
“Roteq Maschinery Inc.” (
The next 47th General
Meeting of the International Intercable Association members
will take place on May 19 – 23,
The subject
matter of the scientific and technical symposium which will be held within the
framework of the General Meeting will be the following: “Specialty cables (automotive
cables and wires; winding wires, including enamel wires): designs, manufacturing
technology and equipment, materials and test equipment”.